Q.L. Niu, S. Li, Y.N. Chen, et al. A constitutive model of Al/50 wt%Sip composites considering particle damage effects[J]. Materials Science & Engineering A, 2022, 836: 142726.
Q.L. Niu, L. Jing, Z. Yu, et al. Experimental study on cryogenic milling performance of SiCp/Al composites with liquid nitrogen[J]. Machining Science and Technology, 2022, 26(1):1-17.
Lu Jing, Qiulin Niu, Dilei Zhan, et al. Predictive Modeling of Surface Roughness and Feed Force in Al-50wt% Si Alloy Milling Based on Response Surface Method and Various Optimal Algorithms[J]. Arabian Journal for Science and Engineering, 2022. https://doi.org/10.1007/s13369-022-07114-8
Lu Jing, Qiulin Niu, Jiaqiang Dang, et al. Milling performance evaluation and cooling/lubrication mechanism of Al‑50wt% Si alloy based on various environmentally sustainable manufacturing strategies[J]. The International Journal of Advanced Manufacturing Technology, 2022, 122:1023–1040.
Q.L. Niu, L. Jing, C.P. Li, et al. Study on effects of tool nose radius on the formation mechanism of edge defects during milling SiCp/Al composites[J]. The International Journal of Advanced Manufacturing Technology, 2021, 114:2261–2269.
Q.L. Niu, L. Jing, C.H. Wang, et al. Study on effect of vibration amplitude on cutting performance of SiCp/Al composites during ultrasonic vibration-assisted milling[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(5-6):2219–2225.
Q.L. Niu, P.N. Li, M. Chen, et al. Analysis of chip serration phenomenon in side milling of ultrahigh-strength steel 30CrMnSiNi2A[J]. International Journal of Advanced Manufacturing Technology, 2017, 88(1):985–993.
Q.L. Niu, W.W. Ming, M. Chen, et al. Dynamic mechanical behavior of ultra-high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures[J]. Journal of Iron and Steel Research, International, 2017, 24 (7) :724-729.
牛秋林,高航,张深圳,等. 超声振动辅助铣削SiCpAl复合材料表面质量与切屑形貌实验研究[J]. 工具技术,2022, 56(4) :12-17.
荆露,牛秋林,陈明,等. 超临界CO2微量润滑铣削Al-42% Si合金切削加工性研究[J]. 工具技术,2022, 56(7) :8-13.
牛秋林,戎杰,高航,荆露. 加工表面完整性对零件抗疲劳性能的影响机理研究进展[J]. 工具技术,2021, 55(9) :3-8.
李爽,牛秋林,李常平,等. 涂层刀具低温铣削SiCp/Al复合材料表面质量研究[J]. 宇航材料工艺, 2021, 51(2): 68-72.
张深圳,牛秋林,李爽,等. 硅铝合金表面缺陷形成机理及其加工工艺优化研究进展[J]. 宇航材料工艺, 2021, 51(1): 10-16.
荆露, 牛秋林, 李树健, 等. SiCp/Al复合材料加工损伤及刀具优选研究进展[J]. 宇航材料工艺, 2019, 49(6): 7-12.
周柏健, 牛秋林, 李鹏南, 等. SiCp /Al 复合材料超声振动辅助切削研究现状与进展[J]. 工具技术, 2019, 53(9): 3-8.
刘枭鹏, 牛秋林, 陈明, 等. 20vol%SiCp/Al复合材料—硬质合金摩擦磨损表面形貌研究[J]. 工具技术, 2019, 53(4): 33-37.
牛秋林, 唐玲艳, 向道辉,等.硬质合金涂层刀具铣削SiCp/Al复合材料刀具磨损[J]. 河南理工大学学报, 2018, 37(4): 90-93.
牛秋林,陈明,明伟伟. TC17钛合金在高温与高应变率下的动态压缩力学行为研究[J]. 中国机械工程, 2017, 28(23):2888-2892, 2897.
牛秋林,唐玲艳,刘晓,等. 切削参数对SiCp/Al 复合材料铣削棱边形貌的影响[J]. 宇航材料工艺, 2017 , 47 (5):35-39.
牛秋林,陈明,明伟伟. 室温下TC11钛合金准静态拉伸力学性能实验研究[J]. 河北科技大学学报, 2017 , 38 (4) :320-324.
牛秋林,陈云,杨军. MDT涂层高温滑动摩擦特性试验研究[J]. 工具技术,2017, 51 (10) :24-26.
唐玲艳, 牛秋林, 李鹏南, 等. 铣削加工参数对SiCp/Al复合材料表面粗糙度的影响[J]. 宇航材料工艺, 2017, 47(6): 64-68.